Specifications
Common Specifications:
Length: 880mm, 1050mm, 1130mm
Thickness: 2.5mm, 3.0mm
Unfolded Width: Approx. 300mm-500mm
Color: Customizable
Common Specifications:
Length: 880mm, 1050mm, 1130mm
Thickness: 2.5mm, 3.0mm
Unfolded Width: Approx. 300mm-500mm
Color: Customizable
Diagonal Ridge are specifically designed for sealing and waterproofing sloping roof ridges (hip ridges). As an essential component of the roofing system, they work in conjunction with ridge tiles, three-way tiles, and other accessories to complete the waterproofing and decoration of the entire ridge system.
Exceptional Weather Resistance:
The surface layer is made of high-weather-resistant ASA engineering resin, offering strong UV resistance, long-lasting color stability, and a service life of 25-30 years.
Excellent Fire Resistance:
Complies with the national standard GB/T 8624-2012, achieving a fire rating of B1 (flame-retardant material). Oxygen index ≥30%, ensuring effective flame retardation.
Outstanding Impact Resistance:
Impact strength is 3-5 times higher than that of ordinary plastic tiles. No cracks observed after a 1kg steel ball is dropped freely from a height of 1 meter. Excellent low-temperature impact resistance.
Strong Corrosion Resistance:
Resistant to acids, alkalis, and chemical corrosion. No chemical reaction occurs after 24 hours of immersion in salt, alkali, and various acids at concentrations ≤40%. Especially suitable for coastal and industrial areas.
Superior Waterproof Performance:
Specifically designed for hip ridges, they tightly interlock with main tiles and ridge tiles to form a continuous waterproof layer, effectively preventing rainwater infiltration along the ridge line.
Thermal Insulation: Low thermal conductivity helps stabilize indoor temperature and reduce energy consumption.
Green & Energy-Efficient: Materials are recyclable; light colors reflect sunlight to enhance insulation; long service life reduces replacement waste and overall costs.
Self-Cleaning & Low Maintenance: Dense, smooth surface resists dust adhesion and is easily cleaned by rainwater.
Installation Sequence: Install after the main tiles and ridge tiles are in place.
Lapping Direction: Lay against the prevailing wind direction, ensuring lapped seams avoid direct rainwater impact.
Lapping Length: Vertical laps should typically be ≥100mm.
Fixing Method: Fix at the wave peaks using specialized self-tapping screws and secure with waterproof caps. Screws should be tightened moderately to allow for thermal expansion and contraction.
Junction Treatment: Cut neatly at junctions with ridge tiles or three-way tiles and seal with weather-resistant sealant for complete protection.
Execution Standard：
JC/T 2054-2011 "Synthetic Resin Tiles"
T/CBMCA 018-2021 "Reinforced Synthetic Resin Tiles"
Transportation：
Flat Placement: Must be placed flat on an even pallet to avoid悬空（suspension）and heavy pressure.
Secure Fastening: During transportation, ensure tight bundling to prevent severe vibration and friction that may cause wear or breakage.
Avoid Rough Handling: Handle with care to protect tile edges and the surface protective film.
It can be transported by sea, land, and air, usually through container transportation
Storage Conditions：
Indoor Storage: Store in a cool, dry, and well-ventilated indoor area, avoiding direct sunlight and rain.
Proper Stacking: Stack layer by layer according to the tile’s curvature, with a height not exceeding 1.5 meters. A flat padding board must be placed at the bottom.
No Heavy Loads: Do not place any heavy objects on the stack to prevent deformation of the lower tiles.
HUIZHOU NOVI Trading Co., Ltd All Rights Reserved. 苏ICP备88888888号