Common Specifications:
Length: 2000mm, 2500mm, 3000mm (standard lengths, customizable)
Unfolded Width: 100mm, 150mm, 200mm, 250mm (customizable based on eave dimensions)
Flange Height: 30mm, 40mm, 50mm (standard sizes)
Color: Customizable
Drip Protection: Used at the eaves of villas, residential buildings, and commercial structures to prevent water dripping.
Water Diversion & Leak Prevention: Applied to windowsills, lintels, and awnings for rainwater drainage and leakage protection.
Compatible with roofing tiles, gutters, eave plates, and other components to form a continuous and complete drainage and moisture-proof system.
Exceptional Weather Resistance
The surface layer is made of high-weather-resistant ASA engineering resin, offering strong UV resistance, long-lasting color stability, and a service life of 25-30 years.
Excellent Fire Resistance
Complies with the national standard GB/T 8624-2012, achieving a fire rating of B1 (flame-retardant material). Oxygen index ≥30%, ensuring effective flame retardation.
Outstanding Impact Resistance
Impact strength is 3-5 times higher than that of ordinary plastic tiles. No cracks observed after a 1kg steel ball is dropped freely from a height of 1 meter. Excellent low-temperature impact resistance.
Strong Corrosion Resistance
Resistant to acids, alkalis, and chemical corrosion. No chemical reaction occurs after 24 hours of immersion in salt, alkali, and various acids at concentrations ≤40%. Especially suitable for coastal and industrial areas.
Superior Waterproof Performance
Specifically designed for hip ridges, it tightly interlocks with main tiles and ridge tiles to form a continuous waterproof laye
Precise Waveform Compatibility: Custom-bent curvature based on the peaks and valleys of resin tiles (e.g., 880-type, 1050-type), enabling seamless engagement without gaps.
Multi-functional Integration: Combines water drainage, wind resistance, insect prevention, and decoration in one design, with smooth edges to avoid installation scratches.
Color Consistency: Produced in the same batch as resin tiles, ensuring lasting color matching with ΔE≤3 (national standard) for 15 years.
Installation Sequence: Install the drip edge before laying the main tiles.
Positioning and Fixing: Install along the eave edge and secure to the eave purlin with specialized screws.
Lap Joint Treatment: Ensure a minimum 50mm overlap in length direction, and apply sealant at the lap joint.
Slope Assurance: Maintain a proper drainage slope during installation to ensure smooth water flow.
Seam Treatment: Use weather-resistant sealant at the joints with the main tiles for waterproofing.
Execution Standard：
JC/T 2054-2011 "Synthetic Resin Tiles"
GB/T 8814-2017 "Unplasticized Polyvinyl Chloride (PVC-U) Profiles for Doors and Windows"
Transportation：
Professional Packaging: Individually packaged with PE film to prevent scratches during transit.
Flat Placement: Place flat on a level pallet to avoid bending or deformation.
Weather Protection: Take measures to prevent rain and moisture during transportation.
Handle with Care: Avoid throwing or heavy pressure during handling to keep the product intact.
It can be transported by sea, land, and air, usually through container transportation
Storage Conditions：
Indoor Storage: Store in a cool, dry indoor environment away from direct sunlight.
Flat Stacking: Stack flat according to package markings, with a height not exceeding 1 meter.
Environmental Requirements: Storage temperature: -30°C to 45°C; relative humidity ≤85%.
Protective Film Retention: Keep the protective film intact before installation to prevent surface scratches.
Avoid Heavy Loads: Do not stack heavy objects on top to prevent deformation and damage.
HUIZHOU NOVI Trading Co., Ltd All Rights Reserved. 苏ICP备88888888号