Thickness: 0.4mm - 1.2mm
Width: 1000mm, 1050mm, 1100mm (standard sizes), customizable upon request
Length: Customized based on construction requirements, typically ranging from 3m to 12m
Wave Height: Generally 20mm, 30mm, 35mm, 40mm, etc.
Large trapezoidal plastic-steel tiles are suitable for buildings, warehouses, factories, carports, parking lots, steel structure roofs, and other applications. They are widely used in industrial, commercial, and agricultural sectors, particularly in roofing systems requiring large spans, where they exhibit excellent performance.
Excellent Corrosion Resistance: Treated with special coatings to effectively resist wind and rain corrosion, adapting to harsh environments.
High Strength: Excellent compression and bending resistance, ensuring structural stability of the roof.
Lightweight: Compared to traditional concrete or stone tiles, plastic-steel tiles are lighter, reducing the load on building structures and facilitating transportation and installation.
Thermal Insulation: Unique coating and wave design effectively isolate heat and noise, enhancing roof comfort.
Strong Weather Resistance: Adapts to high and low temperatures, resists UV radiation, and is less prone to fading.
Wave Design: The large trapezoidal wave design increases the load-bearing area, enhances the bending resistance of the panels, and improves waterproofing effectiveness.
Easy Installation: Large trapezoidal plastic-steel tiles feature self-locking or overlapping designs, enabling quick and convenient installation.
Aesthetic Appeal: The surface coating offers vibrant colors that remain fade-resistant for extended periods, enhancing the building's exterior appearance.
Installation Method:
Pre-Installation Preparation: Ensure the roof frame structure is stable, clean the installation surface, and verify the drainage design of the roofing system.
Pre-Installation Preparation:
Ensure the roof frame structure is stable, clean the installation surface, and check the drainage design of the roofing system.
Installation Steps:
First, lay a waterproof layer on the roof structure, ensuring it is flat and even.
Begin installation according to the predetermined tile width. For large trapezoidal plastic-steel tiles, typically align the wave peaks during overlapping.
Secure the tiles to the structure using specialized screws, ensuring tight seams.
Pay attention to weather conditions during construction. Avoid working in rainy, snowy, or excessively high-temperature environments.
Maintenance:
Regularly inspect the plastic-steel tile surface for accumulated water or debris.
Clean the roof periodically and check whether the seams are properly sealed.
Transportation Methods:
Large trapezoidal plastic-steel tiles can be transported by land or sea freight.
Transportation Requirements:
Avoid direct sunlight and humid environments during transportation to prevent surface discoloration or rusting.
Ensure transport vehicles are stable to prevent damage to the panels during transit.
For long-distance shipments, use specialized protective packaging materials to avoid scratches or impact damage.
It can be transported by sea, land, and air, usually through container transportation
Storage Environment:
Large trapezoidal plastic-steel tiles should be stored in a dry, well-ventilated area, avoiding high temperatures and humid conditions.
Storage Requirements:
Keep the panels level during storage to prevent deformation caused by improper stacking.
For long-term storage, regularly inspect the surface coating to ensure no corrosion occurs.
Panels must be kept away from corrosive substances such as acids or alkalis and avoid direct contact with the ground.
HUIZHOU NOVI Trading Co., Ltd All Rights Reserved. 苏ICP备88888888号